The bespoke men’s blazer patternmaking considers some measurements obtained from the Anatometer; however, in the absence of this instrument, certain recommended values indicated in the Measurement Chart should be used. This patternmaking is designed for a two-button configuration. The design program allows you to modify the collar length, the lapel angle (krag), and the shoulder slope for special shoulders (more sloping shoulders). You must enter the measurements while respecting the maximum and minimum limits established by the software.

Likewise, the patternmaking includes the garment ease and the seam and extension allowances; however, it does not include the fabric allowances required for the vents, which can be configured with two side vents or one center back vent. It also does not include the fabric allowance for the button overlap (buttons), the sleeve hem allowance, or the seam allowance corresponding to the collar, so these must be added afterward.